The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance, exhibit strong anti-corrosive characteristics, also display antifouling and anti-icing properties The most common substrates are: metal, wood, plastic, concrete.

Suitable for primer, indoor and underwater application.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• antifouling\A0 coatings
• ice-phobic coatings

SH-120

SAW-112

The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance, exhibit strong anti-corrosive characteristics, also display antifouling and anti-icing properties The most common substrates are: metal, wood, plastic, concrete.

Extraordinary gloss retention and weather resistance.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• anti-graffiti coatings
• ice-phobic coatings

SH-120

The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance, exhibit strong anti-corrosive characteristics, also display antifouling and anti-icing properties The most common substrates are: metal, wood, plastic, concrete.

Shorter curing time than ES-401

Extraordinary gloss retention and weather resistance.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• anti-graffiti coatings
• ice-phobic coatings

SH-120

LMW resins level well because they make solutions of low viscosity even at high concentrations and will continue to level when they are applied and dry to a smooth and glossy film. Therefore, they saturate better than polymers. LMW resins are glossy and hydrophobic, they dry in a glossy hydrophobic film compared to polymers.

The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance. These finishes are also resistant to water, alkali and acids, suitable to use for underwater application.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• antifouling\A0 coatings
• anti-graffiti coatings
• ice-phobic coatings

SH-120

LMW resins level well because they make solutions of low viscosity even at high concentrations and will continue to level when they are applied and dry to a smooth and glossy film. Therefore, they saturate better than polymers. LMW resins are glossy and hydrophobic, they dry in a glossy hydrophobic film compared to polymers.

The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance. These finishes are also resistant to water, alkali and acids, suitable to use for underwater application.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• antifouling\A0 coatings
• anti-graffiti coatings
• ice-phobic coatings

SH-120

LMW resins level well because they make solutions of low viscosity even at high concentrations and will continue to level when they are applied and dry to a smooth and glossy film. Therefore, they saturate better than polymers. LMW resins are glossy and hydrophobic, they dry in a glossy hydrophobic film compared to polymers.

The coatings from this polymer are hard, tough and have excellent abrasion and solvent resistance. These finishes are also resistant to water, alkali and acids, suitable to use for underwater application.

• offshore/marine coatings
• commercial transport coatings
• pipeline/tank coatings
• structural steel coatings
• antifouling\A0 coatings
• anti-graffiti coatings
• ice-phobic coatings

SH-120

A solvent-free, low viscous methoxy-functional silicone resin,

curing at ambient temperature by catalysis and entering of humidity via a hydrolysis-/condensation reaction.

Use with metallic pigments and special formulations to obtain continuous heat-resistance of up to 600 \B0C.

Forced drying, is only possible in presence of air humidity. The addition of the catalyst TnBT must be carried out just before filling (1K system) or just before the application (2K system). Recommended addition level of the catalyst 0.5 – 3% calculated on binder.

• high temperature application for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, electric and gas heaters
• anti-corrosion coatings (depending on formulation)

Methyl Hydrogen Polysiloxane MHS-10 is nontoxic and insipid. As there are fair quantity of relatively active Si-H bonds in the molecule, under the action of catalysts it can react with chemicals containing active groups, such as double bonds or hydroxyl groups. This product can be converted into film and used to produce a resilient waterproof coating on various materials by using metal salt catalyst at low temperature. It equips itself with outstanding water repellent property which prevents damage due to moisture, as well as mildew and rust development. Besides, its high vapor permeability allows the material to breathe and let water, vapor escape to the outside without causing damage. Suitable catalysts in order of increasing activity include zinc octoate (22% zinc), iron octoate (6% iron), dibutyl tin dilaurate, and tin octoates (28% tin).

A typical catalyst concentration is 0.5% to 3%. Concentrations of the more active catalyst must not be increased to the point that bath life becomes too short. Forced drying, is only possible in presence of air humidity.

• Hydrophobing treatment of hardwood.
• Treatment for hardwood to make them water repellent.