SH-124 is a reactive amine terminated silicone curing agent used as a crosslinker to improve the physical properties and long-term performance of epoxy-siloxane paints and coatings.
APPLICATIONS
SH-124 has been developed primarily for use with liquid epoxy-siloxane resin; it out-performs other epoxy-siloxane based systems by offering the capability to formulate without solvent, at zero VOC and with a visible end of pot-life.
SPECIAL FEATURES
- Fast film-drying and cure with liquid epoxy-siloxane polymer
- Excellent anti-corrosive resistance
- Excellent adhesion, toughness
- Excellent water and chemical resistance
- Low temperature cure
- Reduces the water absorption
- Improves initial flexibility, thermal resistance.
- Excellent compatibility with epoxy-siloxane resins
- extraordinary weathering resistance
- outstanding gloss retention and low yellowing
- isocyanate-free ambient temperature crosslinking
- suitable for very high-solids coatings
- easy-to-clean/anti-graffiti effect
- free of benzylalcohol/alkylphenols
TYPICAL PROPERTIES
Typical general characteristics | Inspection Method | Value |
Boiling point / Boiling range at 1013 hPa | 217 °C | |
Flash point | ISO 2719 | 93 °C |
Density at 25 °C | DIN 51757 | 0,95 g/cm³ |
Viscosity, dynamic at 25 °C | DIN 51562 | approx. 8-15 mPa.s |
Refractive index (25°C) | 1,420 | |
Purity | 97 % | |
A.H.E.W. (g/eg) | 124 |
These figures are only intended as a guide and should not be used in preparing specifications.
APPLICATION
Epoxy polysiloxane systems are an economic alternative to reduce 3 coat systems to a 2 coat system.
- offshore/marine coatings
- commercial transport coatings
- pipeline coatings
- structural steel coatings
- rail car coatings
- tank coatings
- anti-graffiti coatings
- architectural coatings
PROCESSING
Information on guide formulations is available upon request.
- All weather-stable pigments can be used.
- SH-124 with Epoxy-Siloxane paints are 2-pack system.
- First pack contains Epoxy-Siloxane resin, pigments, additives,
- Second pack contains SH-124 as hardener.
- Mix both packs thoroughly prior to use.
STORAGE
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
PACKAGING
400 lbs. steel drum and 42 Lbs. pail
REGISTRATION STATUS
SH-124 ingredients are listed in the following chemical inventories: ECL, EINECS, ENCS, NDSL, PICCS, TSCA.
All ingredients are listed on the TSCA inventory or comply with the TSCA Polymer Exemption criteria according 40 CFR 723.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Safety Data Sheets. They are available on request from Biro Technologies Inc.
As with any product, use of SH-124 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.