SH-182 is a reactive amine terminated polysiloxane with highly branched carboxylic acid combine in one molecule. This curing agent used as a crosslinker to improve the physical properties and long-term performance of epoxy-siloxane paints and coatings.
APPLICATIONS
SH-182 has been developed primarily for use with liquid epoxy-siloxane resin, it out-performs other epoxy-siloxane based systems.
SPECIAL FEATURES
- Fast film-drying and cure with liquid epoxy-siloxane polymer
- Excellent anti-corrosive resistance
- Excellent adhesion, toughness
- Excellent acid and alkali resistance
- Low temperature cure
- Reduces the water absorption
- Very low Absorption/Desorption for cargo tank coatings
- Improves initial flexibility, thermal resistance.
- Excellent compatibility with epoxy-siloxane resins
- outstanding gloss retention and low yellowing
- superior outdoor durability
- suitable for very high-solids coatings
- easy-to-clean/anti-graffiti effect
- Hydrophobic
- Low color
TYPICAL PROPERTIES
Typical general characteristics | Inspection Method | Value |
Boiling point / Boiling range at 1013 hPa | > 250 °C | |
Flash point | ISO 2719 | > 130 °C |
Density at 25 °C | DIN 51757 | 1.0332 g/cm³ |
Viscosity, dynamic at 25 °C | DIN 51562 | 734 mPa.s |
Refractive index (25°C) | 1,420 | |
Purity | 99 % | |
A.H.E.W. (g/eg) | 180-185 |
These figures are only intended as a guide and should not be used in preparing specifications.
APPLICATION
Epoxy polysiloxane systems are an economic alternative to reduce 3 coat systems to a 2 or 1 coat system.
- offshore/marine coatings
- commercial transport coatings
- pipeline coatings
- structural steel coatings
- rail car coatings
- tank coatings
- anti-graffiti coatings
- architectural coatings
PROCESSING
Information on guide formulations is available upon request.
- SH-182 with Epoxy-Siloxane paints are 2-pack system.
- First pack contains Epoxy-Siloxane resin, pigments, additives,
- Second pack contains SH-182 as hardener.
- Mix both packs thoroughly prior to use.
STORAGE
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
PACKAGING
440 lbs. steel drum and 44 Lbs. pail
REGISTRATION STATUS
SH-182 ingredients are listed in the following chemical inventories: ECL, EINECS, ENCS, NDSL, PICCS, TSCA.
All ingredients are listed on the TSCA inventory or comply with the TSCA Polymer Exemption criteria according 40 CFR 723.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Safety Data Sheets. They are available on request from Biro Technologies Inc.
As with any product, use of SH-182 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.