SHW-180 is a reactive amine terminated silicone curing agent with Nano Fluid Surface Technologies (NFST) used as a crosslinker to improve the antifouling properties and long-term performance of epoxy-siloxane antifouling coatings.
NFST
All solid surfaces, even non-stick or smooth ones, are inherently rough on a microscopic level, creating many points that pin a fluid to the surface and cause it to smear
NFST surfaces feature a stable, immobilized liquid lubricant over-layer. Unlike solid surfaces, this liquid surface is truly smooth and extremely slippery. Fluids and biological fouling agents have nothing to hold on to and slide right off.
NFST transform the surface of a solid material into a thin, immobilized of lubricant. This liquid silicon lubricant over-layer completely covers the solid material to create a smooth and slippery liquid surface interface.
Barnacles, mussels and algae stick to the hulls of ships, creating extra drag that costs the shipping industry billions of dollars each year in extra fuel. Most anti-fouling coatings today are copper-based and therefore toxic. Ship operators are looking for an effective and environmentally friendly solution such as the NFST
SPECIAL FEATURES
- Excellent anti-corrosive resistance
- Excellent adhesion, toughness
- Excellent water and chemical resistance
- Reduces the water absorption
- Excellent compatibility with epoxy-siloxane resins
- suitable for very high-solids coatings
TYPICAL PROPERTIES
Typical general characteristics | Inspection Method | Value |
Boiling point / Boiling range at 1013 hPa | 217 °C | |
Flash point | ISO 2719 | >90 °C |
Density at 25 °C | DIN 51757 | 1.05 g/cm³ |
Viscosity, dynamic at 25 °C | DIN 51562 | approx. 300 mPa.s |
Refractive index (25°C) | 1,420 | |
Purity | 97 % | |
A.H.E.W. (g/eg) | 181 |
These figures are only intended as a guide and should not be used in preparing specifications.
APPLICATION
Epoxy polysiloxane systems with NFST for antifouling coatings.
- offshore/marine coatings
- pipeline coatings
- structural steel coatings
- tank coatings
- ice-phobic coatings
- antifouling coatings
PROCESSING
Information on guide formulations is available upon request.
- All weather-stable pigments can be used.
- SHW-180 with Epoxy-Siloxane paints are 2-pack system.
- First pack contains Epoxy-Siloxane,
- Second pack contains SHW-180 as hardener.
- Mix SHW-180 thoroughly prior to use.
- Dry to touch is approx. 4h @ 25°C.
STORAGE
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
PACKAGING
400 lbs. steel drum.
REGISTRATION STATUS
SHW-180 ingredients are listed in the following chemical inventories: ECL, EINECS, ENCS, NDSL, PICCS, TSCA.
All ingredients are listed on the TSCA inventory or comply with the TSCA Polymer Exemption criteria according 40 CFR 723.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Safety Data Sheets. They are available on request from Biro Technologies Inc.
As with any product, use of SHW-180 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.