The CS-25/G10 is a coating system for HVAC/R coil and heat exchangers, based on a special heat conductive coating, achieving a long lasting performance. The CS-25/G10 can be applied before a machine is assembled and installed or even years after installation. The heat exchanging surface of thermo-conductive coatings determines the cooling capacity and consequently energy consumption. CS-25/G10 coating systems meet the requirements of energy conservation systems, by preventing the deterioration of the heat exchanging surface.
CS-25/G10 coating systems provides functionality as a refractory, lubricant, thermal and electrical conductor, UV, electromagnetic pulse and corrosion shield. This coating is Hydrophobic carrying debris from surfaces, becomes almost self-cleaning. Do to the afore mentioned properties helps keep low airflow refrigeration coils from “ice-bridging” between the fin surfaces.
Once the coating cures it will act as a thermal material by not only effectively absorbing radiant energy, but by conducting it away from the “hot zone” through parallel substrate conduction. CS-25/G10 coatings can reduce “hot spots” and, therefore, increase the overall thermal stability of a coating in an environment where radiation heat transfer is an issue.
The CS-25/G10 coatings is flexible because the flake filler is curled, the layers are able to move relative to one another. As tensile and compressive forces develop during flexing, individual filler layers “adjust” their positions to relieve stress that builds between the layers.
The most common substrates for CS-25/G10 coatings are: ferrous nonferrous metal and plastic substrates.
Special features
- excellent corrosion resistance
- suitable for ultra-high solids coatings
- provides chemical inertness,
- provides thermal conductivity,
- antifouling and anti-icing properties
- CS-25/G10 is non-toxic.
Technical information
- delivery form liquid
- appearance dark grey liquid
- contain no solvent
- viscosity at 25 °C approx. 178 mPa s
- EEW approx. 1333 g/eq
- SG: 1.0794 g/cm3
Suitability for
- solvent borne
- 2-pack
- high solid
- graphite pigmented coat
Application
- HVAC Coil coatings
- Heat exchanger coatings
- Radiator coatings
- offshore/marine coatings
- internal and external pipeline coatings
- structural steel coatings
- antifouling and anti-icing coatings
- tank coatings
PROCESSING
- CS-25/G10 with SH-122 are 2-pack system.
- First pack contains CS-25/G10,
- Second pack contains SH-122,
- Mixing ratio by volume: CS-25/G10 9 parts and
SH-122 1 part
- Dry to touch is approx. 30-45 min @ 25°C.
- Avoid thermal cure or accelerated curing conditions at high temperature.
STORAGE
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
PACKAGING
48 lbs. pail
REGISTRATION STATUS
CS-25/G10 ingredients are listed in the following chemical inventories: ECL, EINECS, ENCS, NDSL, PICCS, TSCA.
All ingredients are listed on the TSCA inventory or comply with the TSCA Polymer Exemption criteria according 40 CFR 723.
SAFETY NOTES
Comprehensive instructions are given in the corresponding Safety Data Sheets. They are available on request from Biro Technologies Inc.As with any product, use of CS-25/G10 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.